fredgriffon Posted January 2, 2020 Report Share Posted January 2, 2020 Hi Lubo very interested in the annular for 7.08, 303 rounds. Do you send it to France ? regards Fred Quote Link to comment Share on other sites More sharing options...
Trevor Posted January 14, 2020 Report Share Posted January 14, 2020 Would you please contact me regarding an order for a machine with discs for .308 Winchester and .338 Lapua Magnum. I am new to this site. Quote Link to comment Share on other sites More sharing options...
raptor calls Posted January 14, 2020 Author Report Share Posted January 14, 2020 PM sent! Quote Link to comment Share on other sites More sharing options...
paddy Posted March 12, 2020 Report Share Posted March 12, 2020 i need a 338 wheel Quote Link to comment Share on other sites More sharing options...
awbro Posted July 25, 2020 Report Share Posted July 25, 2020 Hi all, has anyone tried using a rothenberg tourch or map gas with the anealer. I have both and I'm due a delivery soon and I'm wondering if I should get the go gas fine tourch and standard blu butane.🤷🏻♂️ Quote Link to comment Share on other sites More sharing options...
raptor calls Posted July 26, 2020 Author Report Share Posted July 26, 2020 go gas fine flame, best in test.... Quote Link to comment Share on other sites More sharing options...
Sportshooter Posted August 22, 2020 Report Share Posted August 22, 2020 Hi can I order an annealer with disc for 6.5CM. Will the same disc do two four three and three o eight. cheers Quote Link to comment Share on other sites More sharing options...
raptor calls Posted August 23, 2020 Author Report Share Posted August 23, 2020 All your calibers will run on one disc! PM sent. Quote Link to comment Share on other sites More sharing options...
Sportshooter Posted October 2, 2020 Report Share Posted October 2, 2020 Hi there How much would a set of .300 RUM & .338 Lap Mag discs be posted to UK. Cheers Ss Quote Link to comment Share on other sites More sharing options...
micken Posted October 13, 2020 Report Share Posted October 13, 2020 PM sent Quote Link to comment Share on other sites More sharing options...
raptor calls Posted October 14, 2020 Author Report Share Posted October 14, 2020 PM sent Quote Link to comment Share on other sites More sharing options...
Durasell Posted October 24, 2020 Report Share Posted October 24, 2020 Do you still sell these annealing machines Raptor? Quote Link to comment Share on other sites More sharing options...
raptor calls Posted October 26, 2020 Author Report Share Posted October 26, 2020 Yes, please PM me! Quote Link to comment Share on other sites More sharing options...
martin_b Posted November 10, 2020 Report Share Posted November 10, 2020 On 11/2/2016 at 4:57 PM, rsc1960 said: I used some small bore hose from a gas barbeque fitting that we had in the garage, works fine, but when you turn the gas of at the end of the session it takes a wee bit of time to run out due to the pressuered tube. sorry I don't have a better picture of it bob. Can i ask how you connected the burner to the bottle? Are there adapters at each end? cheers Martin Quote Link to comment Share on other sites More sharing options...
rsc1960 Posted November 10, 2020 Report Share Posted November 10, 2020 Hi Martin i cut the nozzle in half using the hose to connect both ends with jubilee clips. bob. Quote Link to comment Share on other sites More sharing options...
David peplow Posted November 11, 2020 Report Share Posted November 11, 2020 On 7/20/2016 at 7:20 PM, raptor calls said: The machine is made of stainless steel. It is very simple to operate and performs very well. The disc plates holding the cases are interchangeable for the different calibers and are replaced by removing couple of thumb screws on top. The annealing time could be set simply by turning a potentiometer and varies between 2 and 16 seconds, depending on your certain requirements. During the process, the case is being moved in front of the flame and lands on a base, which spins it to an 80 RPM, ensuring even and fast heating of the neck. Price is £180 including FREE delivery to UK and Europe. I only accept PayPal payments as it is the safest method for both sides. It takes me approximately 10 working days to complete an order from the moment of payment. I use a courier service, which takes 3-5 working days for delivery and the package is trackable online. The machine comes with one disc and any additional discs you may require for different calibers cost £15 each. The reloading trays on the pictures are also orderable at £15 each. If you are interested, please send me a PM and specify the calibers you need it for !!! Hi how much for the unit with 308,6.5 creedmoor and 223 rings Quote Link to comment Share on other sites More sharing options...
David peplow Posted November 11, 2020 Report Share Posted November 11, 2020 Hi I would like a price for the machine with 308, 6.5 creedmoor and 223 case rings Regards David On 7/20/2016 at 7:20 PM, raptor calls said: The machine is made of stainless steel. It is very simple to operate and performs very well. The disc plates holding the cases are interchangeable for the different calibers and are replaced by removing couple of thumb screws on top. The annealing time could be set simply by turning a potentiometer and varies between 2 and 16 seconds, depending on your certain requirements. During the process, the case is being moved in front of the flame and lands on a base, which spins it to an 80 RPM, ensuring even and fast heating of the neck. Price is £180 including FREE delivery to UK and Europe. I only accept PayPal payments as it is the safest method for both sides. It takes me approximately 10 working days to complete an order from the moment of payment. I use a courier service, which takes 3-5 working days for delivery and the package is trackable online. The machine comes with one disc and any additional discs you may require for different calibers cost £15 each. The reloading trays on the pictures are also orderable at £15 each. If you are interested, please send me a PM and specify the calibers you need it for !!! Hi how much for the unit with 308,6.5 creedmoor and 223 rings Quote Link to comment Share on other sites More sharing options...
raptor calls Posted November 11, 2020 Author Report Share Posted November 11, 2020 PM sent! Quote Link to comment Share on other sites More sharing options...
ezmobile Posted November 20, 2020 Report Share Posted November 20, 2020 (edited) Hello. I'd like to order one of these annealers too. I'm using .223 Rem, .308 Win, 6.5 Creedmoor and .284 Win (how many plates will I need? Also, can these machines be hooked up to run off a big bottle of gas? Please PM me with total price please. Many thanks. Edited November 20, 2020 by ezmobile misspelling. Quote Link to comment Share on other sites More sharing options...
micken Posted November 27, 2020 Report Share Posted November 27, 2020 I received my annealer yesterday morning, well packed and all in good order. It is very well engineered and beautifully made. I have powered it up and started it according to instructions and it's working fine. I'm looking forward to setting it up with a blowtorch and annealing some cases. Good value for money IMHO. Quote Link to comment Share on other sites More sharing options...
diditg Posted December 17, 2020 Report Share Posted December 17, 2020 Hi, Sent you a PM about the purchase of one of these. Quote Link to comment Share on other sites More sharing options...
raptor calls Posted December 17, 2020 Author Report Share Posted December 17, 2020 PM sent! Quote Link to comment Share on other sites More sharing options...
keith marshall Posted February 9, 2021 Report Share Posted February 9, 2021 Hi my name is Keith and I am very interested in your annealer how can I contact you and where are you based. I am based in sandhurst Berkshire many thanks Keith Quote Link to comment Share on other sites More sharing options...
raptor calls Posted February 11, 2021 Author Report Share Posted February 11, 2021 Hi Keith and thank you for your interest! I'm based in Bulgaria and I normally ship orders with DPD. However, they have stopped their services to UK until further notice. As soon as I hear from them I will let everyone know. Regards, Lubo Quote Link to comment Share on other sites More sharing options...
ROBERTO Posted March 2, 2021 Report Share Posted March 2, 2021 BONJOUR JE SUIS INTERESER PAR VOTRE MACHINE COMMENTAIRE JE PEUT FAIRE POUR VOUS COMMANDER UNE PIECE AINSI QUE DES PLATEAUX SUPLEMENTAIREX? CORDIALEMENTS VOTRES ROBERTO Quote Link to comment Share on other sites More sharing options...
.jpg.0972b4e2bdf0b5a4109eb96f2b1b62ad.jpg)
(200x135).jpg.0fd0a94f065c6cb243fdff1b40e0819a.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.