bewsh Posted March 27, 2017 Report Share Posted March 27, 2017 I am running a .22 rated muzzle can on a 6mm BR very quiet, very light, bit of cutting on the front baffle after 60 or so rounds, but a replacement baffle is cheap if I ever get that far I have a spare rear section for use of the same baffle stack on a different rifle IMO I agree the bore of the compared to the calibre rating is a little on the Health and Safety side of acceptable tolerance. Almost 7mm bore for a .224 rated moderator significantly reduces the sound attenuation Link to comment Share on other sites More sharing options...
Chris-NZ Posted March 27, 2017 Report Share Posted March 27, 2017 I guess many of these can manufacturers can't afford to trust all gunsmiths to do concentric threading when they're fitting them Link to comment Share on other sites More sharing options...
.jpg.0972b4e2bdf0b5a4109eb96f2b1b62ad.jpg)
(200x135).jpg.0fd0a94f065c6cb243fdff1b40e0819a.jpg)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.