Meteormann Posted March 1, 2015 Report Share Posted March 1, 2015 Hello I have a cz 452 varmint that i have modifyed much over the years. Now it is getting a anschutz barrel chippen at 16" And a Pm2 4-16x50 on top. But i dont like the boyds tacticool stock. So i would like to buy a syntetic stock for it. What kind of models are there and were can i buy them? I live i norway and There are No places to buy it here. Link to comment Share on other sites More sharing options...
Shuggy Posted March 1, 2015 Report Share Posted March 1, 2015 Manners in the US do one; and Staffordshire Synthetic Stocks in the UK do a couple of different models. I think that PSE Composites in Ireland will also do it as a custom inlet. Link to comment Share on other sites More sharing options...
Meteormann Posted March 1, 2015 Author Report Share Posted March 1, 2015 Thank you for the reply Problems are manners dont eksport! How do i get in contact With Staff synthetic stock? If aanybody have one for sale please let me know Regards Philip Link to comment Share on other sites More sharing options...
Shuggy Posted March 1, 2015 Report Share Posted March 1, 2015 Here you go. http://www.staffs-synthetic-stocks.co.uk Link to comment Share on other sites More sharing options...
Meteormann Posted March 1, 2015 Author Report Share Posted March 1, 2015 Thanks! I've sees the paige, but can't find any pictures or emil. The Page looks rather old. Link to comment Share on other sites More sharing options...
Shuggy Posted March 1, 2015 Report Share Posted March 1, 2015 It's a terrible website, but they are supposed to be upgrading it soon. The telephone number is right though. Check out the custom 22LR thread for some good pictures of a SSS stock. Link to comment Share on other sites More sharing options...
Scotch_egg Posted March 2, 2015 Report Share Posted March 2, 2015 I met the chap from staffs synthetic stocks at the British shooting show. The progress the company has made since it's inception is ten fold. I have a couple of photos of the small thoughtful add ons that they put into the molds that make them just that little bit special. Link to comment Share on other sites More sharing options...
Gooner Posted March 2, 2015 Report Share Posted March 2, 2015 Joe West do a nice range for the CZ 452 and good prices Link to comment Share on other sites More sharing options...
Meteormann Posted March 2, 2015 Author Report Share Posted March 2, 2015 Tried to look for the custom 22 tread but did not find any pictures off any sss stock. Joe west hade a couple of Nice stocks, but i want a syntetic stock this time. Regards Philip Link to comment Share on other sites More sharing options...
Meteormann Posted March 2, 2015 Author Report Share Posted March 2, 2015 Tried to look for the custom 22 tread but did not find any pictures off any sss stock. Joe west hade a couple of Nice stocks, but i want a syntetic stock this time. Regards Philip Link to comment Share on other sites More sharing options...
treetop Posted March 2, 2015 Report Share Posted March 2, 2015 I have seen ( a few years ago ) that there was a company in France that did good stocks for CZ.. IMO SS stocks are way too expensive for rimfire rifles ... You could make one ?!? I made mine from an airsoft stock ... Link to comment Share on other sites More sharing options...
Meteormann Posted March 2, 2015 Author Report Share Posted March 2, 2015 I have seen ( a few years ago ) that there was a company in France that did good stocks for CZ.. IMO SS stocks are way too expensive for rimfire rifles ... You could make one ?!? I made mine from an airsoft stock ... I have seen ( a few years ago ) that there was a company in France that did good stocks for CZ.. IMO SS stocks are way too expensive for rimfire rifles ... You could make one ?!? I made mine from an airsoft stock ... That's a awsome stock! Been looking at making my own. But what kind of airsoft did i choose? And how is The quality? Link to comment Share on other sites More sharing options...
Shuggy Posted March 2, 2015 Report Share Posted March 2, 2015 Tried to look for the custom 22 tread but did not find any pictures off any sss stock. Joe west hade a couple of Nice stocks, but i want a syntetic stock this time. Regards Philip See the post by 6.5Shooter: http://ukvarminting.com/forums/topic/28282-building-a-custom-22lr/ It's on an Anshutz 1710, but they will definitely do it for a CZ as well. I've also seen a thumbhole model as well. Whether a SSS or similar is too much to pay or not for a humble rimfire is a rather individual thing. For example there are plenty of people on here with top-notch German glass on middle of the road factory rifles. If you really want a synthetic stock for a rimfire, then there aren't too many options. Link to comment Share on other sites More sharing options...
Ballistol Posted March 2, 2015 Report Share Posted March 2, 2015 Manners in the US do one; and Staffordshire Synthetic Stocks in the UK do a couple of different models. I think that PSE Composites in Ireland will also do it as a custom inlet. I bought this from here last year, it shows the PSE stock. http://ukvarminting.com/forums/topic/23216-sold-mint-left-hand-cz-american-22lr-in-e-tac-stock-with-posh-bottom-metal/?hl=cz452&do=findComment&comment=189423 Link to comment Share on other sites More sharing options...
treetop Posted March 2, 2015 Report Share Posted March 2, 2015 I couldn't find the stock i wanted, & i wasn't going to pay nearly £ 200 for something that i wasn't happy with made out of wood, and double that made out of plastic So i sat down, thought about it & basically come up with an idea. I bought a broken airsoft rifle from a local air soft dealer ( broken, as in it didn't work. ) .. Ripped it apart , as I only wanted the ' skins' .. I made a new chassis with a section of alloy box .. Drilled and cut out the holes so the trigger mech would pass through, ground back the inside of the plastic skins, so it would fit the chassis .. Painted & assembled .. Very happy with the result ..! It's soounds much easier to write or say than it was.. But it was worth the grief Link to comment Share on other sites More sharing options...
Meteormann Posted March 13, 2015 Author Report Share Posted March 13, 2015 Hello i have looked at the options of à Airsoft stock, but want to buy a quality stock. I have spent so much on it anyways. What is the Email to staffordshire stocks? Or pse? And does anybody know the price ? Gonna Get the rifle back from The doctor next week with the anschutz barrel instaled Philip Link to comment Share on other sites More sharing options...
.jpg.0972b4e2bdf0b5a4109eb96f2b1b62ad.jpg)
(200x135).jpg.0fd0a94f065c6cb243fdff1b40e0819a.jpg)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.