Jump to content

Third Eye Tactical Rail - Tikka M595


Guest Stacka

Recommended Posts

Guest Stacka

I finally received my third eye tactical rail and managed to source some bolts to fit it.Struggled to find a allen key to fit nicely enough so went imperial which was perfect.

 

The rail fitted perfectly.

 

Next for my rifle:-

 

GRS stock and bedded.

Bolt beaded

Decent barrel, with fluting

 

 

CIMG0821.JPG

 

CIMG0823.JPG

 

CIMG0824.JPG

 

 

Link to comment
Share on other sites

Guest Stacka

Yes, 8mm turned out to be fine. The front screw needed filing

 

I got a drawing from Tikka for third eye, they will start to supply screws with their rails.

 

You can have the barrel it's not immaculate but ok.

 

You know of any good rifle building houses to do the work?

Link to comment
Share on other sites

Are those medium QRW mounts and a 50mm objective scope? Reason I ask is that I am doing just the same with a 595. I have a photon on one set of QRW mounts and have just got a 4-18 x50 Kahles. I need another set of QRW mounts but am undecided on medium or low for the 50mm objective. Looks like you have a good setup there.

PS a very big +1 on Ronins work,

Link to comment
Share on other sites

Have just checked and my Photon and my Kahles would fit on low QRW mounts with a TET 0 MOA rail, still have loads of spare room for scope caps etc

Link to comment
Share on other sites

Guest Stacka

Fair enough, mine is very close to the barrel.

 

I'm saving for a front mounting NV system eventually so will need the clearance on the Swaro

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy